Professional Multi Cartridge Heater

Characterstics

Holds up to 6 Caronlab Australia 80ml or 100ml Strip Wax Cartridges
2x Independently operating sections
2x Adjustable Temperature Control Dials
2x Hygienic Covers

Benefits
Easy to clean design
Hygienic Covers protect Strip Wax Cartridges from contamination
Heats Strip Wax Cartridges in minutes thanks to adjustable Temperature Control Dials
Two independent sections for ultimate convenience
Large capacity ensures you have enough Wax heated and never need to leave clients waiting
Ideal for busy Salons and Schools

When To Use
The Professional Multi Cartridge Heater is perfect for use during any professional Waxing service. The Professional Multi Cartridge Heater quickly and evenly melts Caronlab Australia 80ml and 100ml Strip Wax Cartridges.

How To Use
Material Safety Data Sheet

Operating Instructions

Remove Professional Multi Cartridge Heater from packaging.
Lift up the protective Hygienic Cover and insert your 80ml or 100ml Cartridges into the perfect size slots, then close the Hygienic Cover.
Plug the Multi Cartridge Heater into a power socket and press ON/OFF switch to ON.
Select required heat setting on the Temperature Control Dial (1) low – (6) high. The Multi Cartridge Heater will regulate temperature to the chosen setting. It is recommended that you test the temperature of the Wax prior to treatment and adjust using the Temperature Control Dial if needed.
When Cartridges reach the desired temperature, lift up the Hygienic Cover and remove Cartridge. Cartridge can be placed in the Caronlab Professional Single Cartridge Heater. Apply Wax in the direction of hair growth & continue following normal treatment procedures.
Handy tip: Wax skin in sections as you would when using spatula technique for best results.

Return your Wax Cartridge to the Multi Cartridge Heater unit when finished in order to maintain Wax temperature.
To turn the Heater off, press ON/OFF switch to OFF.
Maintain your Professional Multi Cartridge Heater by cleaning it with Caronlab Australia Solvent – Wax Remover Citrus Clean and disinfect with Micro Defence Spray. Remember always unplug the Heater before cleaning and ensure cleaning fluid is used sparingly.
ATTENTION: Never leave Professional Multi Cartridge Heater switched on when there are no Cartridges in the Heater unit. Do not immerse the Heater in water, or use it in an area where it could be splashed.

Cleaning:

The Heater should only be cleaned with a recognised Wax equipment cleaner specifically formulated for the removal of Wax; this will maintain the Heater in optimum condition if used regularly.
Never use Surgical spirit for cleaning, as this will erode the plastic casing of the Heater and cause damage.
Do not use other solvents as they could damage the Heater and may produce toxic fumes when the Heater is operated.
Wax spilt onto the Heater casing should be removed as soon as possible. If the Wax is allowed to harden, removal is more difficult.
It is especially important to keep the ON/OFF switch and the Temperature Control Dial free of Wax.
WARNING: To reduce the risk of burns, electrocution, fire or injury to persons:

An appliance should never be left unattended when plugged in. Unplug immediately after using.
Always unplug the Heater before cleaning and ensure that cleaning fluid is used sparingly.
Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
Never operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been dropped into water. Return the appliance to a service centre for examination and repair.
Keep the cord away from heated surfaces.
The Heater element is capable of producing a very high temperature. Therefore, never move the Heater whilst the Wax is hot.
Never block the air openings of the appliance or place it on a soft surface. Keep air openings free of lint, hair, and the like.
Never drop or insert any object into any opening.
Never have the Heater switched on when there is no Wax Cartridge in the unit. Never insert the Cartridge into the heating chamber without Roller Head.
Do not use outdoors or operate where aerosol (spray) products are being used.
Do not wrap the cord around the appliance. Do not twist the cord.