Professional Wax Heater Insert – 500ml

Setup Instructions – Hard and Film Wax

1. Remove Professional Wax Heater from packaging. Place Professional Wax Heater’s Protective Skirt on top of the unit and click into place.
2. Place Metal Insert inside the Wax Heater. When set up correctly, Metal Insert’s Plastic Rim and Handle should sit just visible inside Professional Wax Heater’s Protective Skirt.
3. Plug the Wax Heater into a power socket and press ‘ON/OFF’ switch to ‘ON’.
4. Follow Heating and Usage Instructions as per the product packaging on your Wax. For ultimate convenience, Caronlab Australia Microwave to Pot™ jars can be placed directly into the Metal Insert.
5. After operation, turn the Wax Heater ‘OFF’.

Setup Instructions – Strip Wax

1. Remove Professional Wax Heater from packaging. Place Metal Insert inside the Wax Heater.
2. Place Caronlab Australia Microwave to Pot™ Wax jar directly into the Metal Insert, or decant your melted Wax into the Metal Insert as per Heating Instructions on product packaging.
3. Place the Drip Tray on top of Professional Wax Heater 1lt and its accompanying Metal Insert.
4. Click Drip Tray into place. The Wiping Bar may be positioned towards the front, left or right of the Wax Heater, to adapt to the preferences of each Therapist and setup of each Salon.
   When set up correctly, Drip Tray should sit flat on top of Wax Heater, covering the entirety of the Metal Insert including Plastic Rim and Handle.
5. Plug the Wax Heater into a power socket and press ‘ON/OFF’ switch to ‘ON’.
6. Follow Usage Instructions as per the product packaging on your Wax.
7. After operation, turn the Wax Heater ‘OFF’.

Safety and Cleaning

1. This appliance is for professional use only.
2. Do not immerse the Heater in water or use it in an area where it could be splashed.
3. If the Power Supply Cord is damaged, it must be replaced by an authorised service agent.
4. Never leave Wax Heater switched on when the Metal Insert is empty.
5. Clean unit with Caronlab Australia Solvent – Wax Remover Citrus Clean.
6. Do not use other brands’ solvents as they may cause damage and toxic fumes when heat is activated. Keep switches and Temperature Control Dial free of Wax.