Smooth & Remove Pure Olive Oil Strip Wax – 100ml

Characterstics
Green with a semitransparent consistency, fragrance free
Formulated with a Natural Resin
Enriched with Olive Oil and natural Beeswax

Benefits
Great for speed Waxing
Ideal for stubborn and coarse hair
Suitable for clients who have recently shaved

Where To Use
Total Body (arms, legs, back, torso)

How To Use
Material Safety Data Sheet

Usage Instructions – Strip Wax

Area to be treated must be clean, dry and free from any oils and creams. Caronlab Australia recommends the use of Prep – Pre Wax Skin Cleanser as it has been designed to work together for best results with Caronlab Australia Waxes. Always test Wax on the inside of your wrist before use. Do not apply on warts, moles and broken or irritated skin.
Apply Wax thinly in the same direction as hair growth. If using a Strip Wax Cartridge, hold the Heater system at an approximately 45 degree angle and apply the Wax in the direction of the hair growth. Continue by following normal treatment procedures.
Place Strip over the Wax and press firmly.
Hold skin taut with one hand and pull Strip off in the opposite direction.
For the perfect finish and to remove any Wax residue on the skin, we recommend you use After – After Waxing Oil and Soothe Mango & Witch Hazel or Tea Tree After Wax Soothing Lotion to complete your treatment. To clean equipment use Solvent – Wax Remover Citrus Clean.
Heating Instructions – Microwave to Pot™ technology

Place Caronlab Australia Wax Heater Insert into your Caronlab Australia Professional Wax Heater. Microwave to Pot™ technology jars should be placed directly into a Wax Heater Insert.
To warm Wax directly in your Caronlab Australia Professional Wax Heater, remove the lid and insert jar directly into an appropriate professional Wax Heater on a medium setting.
To use Microwave to Pot™ technology, remove lid from jar and place off centre in microwave and heat for a minimum of 2 minutes, but no longer than 4 minutes depending on the wattage of your microwave and the amount of Wax remaining in the jar.
Once Wax has softened, place jar into your Caronlab Australia Wax Heater Insert. Regulate Heater to a medium setting of approximately 149°F–167°F or 65°C–75°C, between dial 4-5 on your Caronlab Australia Professional Wax Heater.
Important: Do not heat over 140°C/284°F
Place a Wax Heater Insert into your Caronlab Australia Professional Wax Heater. Microwave to Pot™ technology jars should not be placed directly into a Wax Heater
Do not try this with other brands’ pots; they will melt in the Wax Heater
Heating Instructions – Strip Wax Cartridge

Strip Wax Cartridges have been sealed for hygiene, peel off seal to remove prior to placing in Caronlab Australia Professional Multi or Single Cartridge Heater.
Select required heat from 1 (low) – 5 (high) setting on the adjustable Temperature Control Dial. The Temperature Indicator Light will turn red when the handheld Heater is in use. It is recommended that you test the temperature of the Wax prior to treatment and adjust using the Temperature Control Dial as
Leaving the Strip Wax Cartridge in the handheld Heater, turn upside down allowing the Wax to flow into the Roller Head.