Agar Mould-X | Mould Exterminator – 20Lt
$182.00
Mould-X is a mould exterminator for killing mould and mildew. It removes mould stains and dirt from hard surfaces. Mould-X can be used for both indoor and outdoor areas.
Key Benefits:
- Mould-X destroys mould and mildew.
- Mould-X removes mould stains, dirt, fats, oils, soap build-up and other soilage.
How Does It Work?
Mould-X contains available chlorine which is present in solution in the form of sodium hypochlorite and hypochlorous acid. Hypochlorous acid is a powerful germ-killing agent which kills mould and mildew. Mould-X also contains caustic alkali and detergents to provide an excellent cleaning action.
Application:
- Mould-X is ready to use. No mixing required.
- Always pre-test Mould-X in an inconspicuous place before use to ensure no unwanted reactions occur.
- Apply Mould-X via spray, mop or cloth.
- Scrub with a nylon brush to ensure that Mould-X gets into all crevices.
- Leave in contact with the surface for 10 minutes.
- Rinse thoroughly with clean water and allow to dry.
- Repeat the process, if necessary, until all staining has been removed.
Do not mix with detergents or other chemicals. Do not allow to contact carpets, fabrics or alkali-sensitive surfaces. Observe the Use-by Date printed on the label. Store below 25°C and away from direct sunlight
Contains: Sodium Hypochlorite less than 10%, Sodium Hydroxide less than 2%, Surfactants less than 10% and water to 100%.
Mould-X is a mould exterminator for killing mould and mildew. It removes mould stains and dirt from hard surfaces. Mould-X can be used for both indoor and outdoor areas.
Key Benefits:
- Mould-X destroys mould and mildew.
- Mould-X removes mould stains, dirt, fats, oils, soap build-up and other soilage.
How Does It Work?
Mould-X contains available chlorine which is present in solution in the form of sodium hypochlorite and hypochlorous acid. Hypochlorous acid is a powerful germ-killing agent which kills mould and mildew. Mould-X also contains caustic alkali and detergents to provide an excellent cleaning action.
Application:
- Mould-X is ready to use. No mixing required.
- Always pre-test Mould-X in an inconspicuous place before use to ensure no unwanted reactions occur.
- Apply Mould-X via spray, mop or cloth.
- Scrub with a nylon brush to ensure that Mould-X gets into all crevices.
- Leave in contact with the surface for 10 minutes.
- Rinse thoroughly with clean water and allow to dry.
- Repeat the process, if necessary, until all staining has been removed.
Do not mix with detergents or other chemicals. Do not allow to contact carpets, fabrics or alkali-sensitive surfaces. Observe the Use-by Date printed on the label. Store below 25°C and away from direct sunlight
Contains: Sodium Hypochlorite less than 10%, Sodium Hydroxide less than 2%, Surfactants less than 10% and water to 100%.
Related products
-
Solution – Hydrodermabrasion 400ml
Price range: $160.00 through $440.00 Select options This product has multiple variants. The options may be chosen on the product page -
14 in 1 Micro Needle Pen – Replacement Needles
Price range: $130.00 through $340.00 Select options This product has multiple variants. The options may be chosen on the product page
